Otis Elevator Service Debugger Button Description:
The 16 buttons of the Otis Elevator Service Debugger are divided into two parts:
The four parts on the left are:
MODULE 、 FUNCTION、 SET 、 Blue key
1: MODULE returns to the main menu of the service tool anywhere in the service tool software.
2: Function returns to the installation and maintenance function menu at any position in the system for selecting the system.
3: SET returns to the project menu at any position in the function for selecting installation and maintenance functions.
4: The blue key is equivalent to the up shift key SHIFT on a computer keyboard (the white part of the button functions when the blue key is not pressed, and the blue part of the button functions when the blue key is pressed). When the blue key is pressed, you will see a flashing light at the first character position of the debugger's display, indicating that the blue key function is effective. When you press the corresponding function key, this flashing cursor will disappear.
Twelve buttons on the right
It is entirely composed of two parts: half white and half blue. When pressed normally, the function of the white part is used. If you want to use the function of the blue part, you need to first press the unmarked blue button in the bottom left corner of the keyboard, and then press the function key you want to press.
The function of this blue key and the twelve buttons on the right is the same as the principle on a computer keyboard. The blue key is equivalent to the up shift key SHIFT on the computer keyboard.
Function key function
SHIFT+4 hexadecimal digit A
SHIFT+5 hexadecimal digit B
SHIFT+6 changes the sign or hexadecimal number C of any number that has already been entered
SHIFT+7 hexadecimal digit D
SHIFT+8 hexadecimal digit E
SHIFT+9 hexadecimal number F
CLEAR erases the last input digit (if there is an error in the input)
SHIFT+CLEAR (this function is equivalent to the Enter and Enter keys on a computer keyboard) is used to save values after entering or changing them
GO ON Forward Conversion Display
GO PACK backward conversion display (press the SHIFT key first, and then when pressing the GO ON/GO PACK key, the GO PACK function will be implemented)
Server usage:
After inserting the server into the interface of the Otis elevator board, the ST display will first display the words: SELF TEST - OKMECS-MODE.
The meaning here is: The server self-test has passed, and the current connection is in modular elevator control system mode. This display is normal. If other words appear, please unplug the debugger and reinsert it in the experiment. If the problem cannot be solved, it may be due to a malfunction in the debugger or elevator components.
